Preparation

• 1). Choose the photographs you want to use. Make sure that they are all the same height.
  
  
• 2). Cut any photographs that need their size adjusted or that you want to crop for effect. Use a ruler to guide you in creating a straight line. Use a pen to draw a line from the top to bottom of the photograph where you want to cut. Cut the photograph.
  
  
• 3). Determine the height of the border on the wall and mark it with a pencil.
  
  
• 4). Hold the first photograph on the wall where you want the border to start and use a pencil to mark where the photograph ends on the wall.
  
  
• 5). Hold the next photograph on the wall at the mark you created with the pencil to see how much space it will take. Mark the wall with the pencil at the end of that photograph.
  
  
• 6). Continue marking the wall with the pencil for each photograph's placement until you know where each photograph will go and how much space it will take.
  
  

Application

• 1). Apply the adhesive tack to the back of the first photograph you want on the wall. Put a small amount on each corner and along the edges.
  
  
• 2). Attach the first photograph at the determined height on the wall in a corner.
  
  
• 3). Apply the adhesive tack to the back of the next photograph you want on the wall, placing a small amount on each corner and along the edges.
  
  
• 4). Place the photograph flush against the first photo so that the top and bottom of both photographs are aligned.
  
  
• 5). Repeat steps 6 and 7 until you have placed all the photographs on one wall. Continue applying the photographs on the next wall, if desired, until all walls are complete.