Main Errors of the Xbox 360 Red Ring of Death - Discover How to Fix Them For Good Using These Tips
How much fun have you lost since your console became infected by the famous Xbox 360 red ring of death? It is such a shame for something that can bring so much pleasure to a person can just suddenly crash without any prior warning.
You may not know this but there are many errors that can suddenly occur to your console.
But the daddy of them all is the dreaded Xbox ring of death as this usually means there is something loose within the motherboard.
Usually it is the GPU that suffers due to Microsoft opting to use lead free solder and when constant over-heating comes into play, these joints can crack as a result.
During consistent play with your console and without proper cooling time, vibrations within the main areas of the Xbox 360 cause these connections to finally give way.
Another way you can begin to see Xbox red rings is when the consoles power supply unit malfunctions.
Poor ventilation without proper breaks in play can lead to serious over-heating of this part of your console and you will begin to see the familiar Xbox 360 3 red lights.
Without proper heat escape the graphics processor unit can also over-heat because of the heat-sinks not being able to cope with heat during play.
Overall, the main concern and cause for the Xbox 360 red ring of death comes down to its design by Microsoft.
Because of the slim and sleek design everything inside tends to suffer as it is all packed in together without any proper room to breathe causing major components to suffer as a result.
If you have some form of experience with electronic devices then fixing these errors should be very easy for you.
Remove your consoles outer shell then take out the hard disk and DVD drives.
Find the GPU and this is where you will find the heat-sink, this lies on top and when you take this out be careful because if you have just recently played it will be rather hot.
The next job is quite simple once you have bought some thermal paste.
You can buy this from any almost any electronic store and when purchased just apply some onto the top of your GPU.
Leave to set for a few minutes then re-insert the x-clamp, this holds the heat-sink to the motherboard.
Next re-install the hard disk and DVD drives, place the outer casing back onto the console and turn on the power once everything is back in its original state.
Once you have fixed this error and are happily playing again, allowing good ventilation to your Xbox 360 is a great habit to get into.
keep away from dust, dirt, grime and any other household clutter you can think of.
You may not know this but there are many errors that can suddenly occur to your console.
But the daddy of them all is the dreaded Xbox ring of death as this usually means there is something loose within the motherboard.
Usually it is the GPU that suffers due to Microsoft opting to use lead free solder and when constant over-heating comes into play, these joints can crack as a result.
During consistent play with your console and without proper cooling time, vibrations within the main areas of the Xbox 360 cause these connections to finally give way.
Another way you can begin to see Xbox red rings is when the consoles power supply unit malfunctions.
Poor ventilation without proper breaks in play can lead to serious over-heating of this part of your console and you will begin to see the familiar Xbox 360 3 red lights.
Without proper heat escape the graphics processor unit can also over-heat because of the heat-sinks not being able to cope with heat during play.
Overall, the main concern and cause for the Xbox 360 red ring of death comes down to its design by Microsoft.
Because of the slim and sleek design everything inside tends to suffer as it is all packed in together without any proper room to breathe causing major components to suffer as a result.
If you have some form of experience with electronic devices then fixing these errors should be very easy for you.
Remove your consoles outer shell then take out the hard disk and DVD drives.
Find the GPU and this is where you will find the heat-sink, this lies on top and when you take this out be careful because if you have just recently played it will be rather hot.
The next job is quite simple once you have bought some thermal paste.
You can buy this from any almost any electronic store and when purchased just apply some onto the top of your GPU.
Leave to set for a few minutes then re-insert the x-clamp, this holds the heat-sink to the motherboard.
Next re-install the hard disk and DVD drives, place the outer casing back onto the console and turn on the power once everything is back in its original state.
Once you have fixed this error and are happily playing again, allowing good ventilation to your Xbox 360 is a great habit to get into.
keep away from dust, dirt, grime and any other household clutter you can think of.