How to Remove a Pontiac Harmonic Balancer
- 1). Install the crankshaft pulley bolt removal tool onto the balancer. Slide the tool over the pulley and align the hole in the center of the tool with the threaded hole in the center of the harmonic balancer. Thread the bolt through the center of the tool. The balancer should now be held in place.
- 2). Turn the air compressor on and set the pressure setting to the highest available setting.
- 3). Connect the hose on the compressor to the impact wrench handle using the quick-connect lock on the hose.
- 4). Remove the pulley bolts by turning them counterclockwise with the impact wrench.
- 5). Remove the bolt removal tool and pull the balancer off the crankshaft.