DIY Drafting Table
- 1). Select your drawing surface at your local lumberyard. Look for a smooth impermeable surface, such as high-pressure laminate or medium-density fiberboard. Determine your maximum drawing size and add a few inches to each dimension as a margin of safety. Cut your board to this size. Alternately, a flush solid core wood door can provide a combination of desktop and drawing surface.
- 2). Unroll the vinyl mat at room temperature. Allow it to lay flat for a few hours to rest and lose some of its curl.
- 3). Apply the double-sided stick tape to the vinyl mat along all four edges and diagonally. Avoid overlapping the tape. Position the taped mat on the drawing surface and apply pressure to the mat to adhere it to the board.
- 4). Install an optional hinge and adjustable hardware that would allow you to angle your drawing surface. Typically, 30 degrees is a comfortable maximum.
- 5). Mount the drafting board atop file cabinets or a desk. Using one file cabinet on either end creates a base for your drawing board that doubles as storage space.