Wahl Peanut Replacement Blade Instructions
- 1). Place the Wahl Peanut on a flat surface.
- 2). Use the Phillips screwdriver to remove the two small screws on the top plate by turning them in an counterclockwise direction.
- 3). Remove the screws and place them in a safe place. Remove the top and bottom blades.
- 4). Clean off the Wahl clipper by spraying it with Wahl blade coolant. Use the included blade brush to remove any hair.
- 5). Put the new blades in place and secure by screwing the two screws back in. Make sure the blades are properly aligned.
- 6). Oil the new blade with Wahl oil, spray it in the top and sides to ensure that it is sufficiently lubricated. Run the trimmer to distribute the oil.