How to Use a Lenmar PPU1700B
- 1). Plug the small end of the MiniUSB adapter tip into the small end of the device's USB cable. Plug the remaining end of the adapter tip into the matching port located on the bottom of the device, near the right edge. Plug the opposite end of the cable into your computer's USB port.
- 2). Allow the device to charge completely; the indicator light on the front panel will turn blue when the device is ready for use. Disconnect the USB cable from the device and your computer. Remove the USB adapter tip from the end of the cable.
- 3). Select an adapter tip that matches the charging port for the device that you intend to recharge. Plug the small end of the adapter tip into the small end of the USB cable. Plug the opposite end of the cable into the USB port located on the bottom of the device, near the left edge.
- 4). Press the round button located near the bottom edge of the device's front panel. Confirm that the indicator light is glowing blue. Leave the charger connected to the attached device until charging is complete; the indicator light will begin flashing if the charger's battery is running low.
- 5). Disconnect the USB cable from the charger and attached device. Unplug the adapter tip from the end of the cable.