Tracing the History of Server Racks
It's quite interesting to observe how words change quickly over the years in the IT industry. A very good example of this is how the name server racks developed from the terms like data cabinet, computer rack or enclosure cabinet which were basically desks or racks made to place the hardware of the computer especially the EIA rack rails that were 19 inch wide. Here is a little bit of history for those who wish to know about evolution of this term over the years.
Most of the cabinets manufactured were considered to be quite shallow with the depth of 20 to 24 inch and this remained unaltered for many years. Few years down the line blade servers started to become quite famous and that's when the necessity for deeper cabinets arose. Most servers ranged between fifteen and twenty inch depth which could be easily fitted in an 8U or 4U space. This situation started to change only with the arrival of blade servers. Several famous blade servers were made in such a way that they took up just 1U to 4U space. With this came the opportunity to accommodate more server blades in the same rack.
The above mentioned arrangement wasn't free of problems. When more servers were fitted in a single rack, the servers had to be pushed deeper and they also started to become much hotter. Dispersion of heat was done by sucking the air from the forward part of the server and letting it all out through the back. These kinds of servers did not work well in an ordinary enclosure because of the heat developed and hence the need for new kind of racks.
The new rack that was developed in such a way that it was deeper and allowed the flow of air that passed the front and rear parts of the servers. This helped the servers from burning. Hence the industry term changed to server racks. Dell, a famous company in the IT industry in association with other manufacturers started to produce sliding rails that was used to fix these racks along with a special kind of flange. This arrangement perfectly fits in a hole shaped like a square and this could be done without using screws.
The best place to search for these kinds of racks is the internet. Browse through the websites that offer discount on such products and make use of such discounts to organize your workplace.
Most of the cabinets manufactured were considered to be quite shallow with the depth of 20 to 24 inch and this remained unaltered for many years. Few years down the line blade servers started to become quite famous and that's when the necessity for deeper cabinets arose. Most servers ranged between fifteen and twenty inch depth which could be easily fitted in an 8U or 4U space. This situation started to change only with the arrival of blade servers. Several famous blade servers were made in such a way that they took up just 1U to 4U space. With this came the opportunity to accommodate more server blades in the same rack.
The above mentioned arrangement wasn't free of problems. When more servers were fitted in a single rack, the servers had to be pushed deeper and they also started to become much hotter. Dispersion of heat was done by sucking the air from the forward part of the server and letting it all out through the back. These kinds of servers did not work well in an ordinary enclosure because of the heat developed and hence the need for new kind of racks.
The new rack that was developed in such a way that it was deeper and allowed the flow of air that passed the front and rear parts of the servers. This helped the servers from burning. Hence the industry term changed to server racks. Dell, a famous company in the IT industry in association with other manufacturers started to produce sliding rails that was used to fix these racks along with a special kind of flange. This arrangement perfectly fits in a hole shaped like a square and this could be done without using screws.
The best place to search for these kinds of racks is the internet. Browse through the websites that offer discount on such products and make use of such discounts to organize your workplace.