How to Reset the Service Wrench on the Polaris Sportsman 500
- 1). Insert the ignition key into the ATV's ignition switch. Turn the key to the "On" position, then back to the "Off position." Wait for 10 seconds.
- 2). Lock the ATV's parking brake and shift into "Neutral."
- 3). Press and hold the "Mode/Reverse" override button on the left handlebar. Turn the ignition key to the "On" position. The ATV's speedometer display will enter into a diagnostic mode at this time.
- 4). Press the "Mode" button on the left handlebar repeatedly to toggle through the display's diagnostics menus. Stop on the "Service Interval" screen.
- 5). Press and hold the "Mode" button until the service wrench icon begins to flash. Release the "Mode" button and wait for the service wrench icon to stop flashing.
- 6). Turn the ignition key to the "Off" position.