How to Program a Nortel Phone
- 1). Pick up the receiver of your Nortel phone off of the base. You will hear a dial tone.
- 2). Press the "Feature" button on the base of your Nortel phone. Press the star button followed by the "1" button on the keypad to store external numbers.
- 3). Press one of the 24 memory buttons on the right side of the base to begin programming it. Once you have hit the button, press the number buttons in the center of the base to dial an external number you wish to save to the Nortel phone. Include the "9" button if you need to press it to dial and external number and be sure to include the area code and country code to dial a long-distance number.
- 4). Press the "OK" button save this number to the memory button you programmed. Repeat Steps 2 through 3 to program other external numbers.
- 5). Press the "Feature" button on the base of your Nortel phone. Press the star button followed by the "2" button on the keypad to store internal office numbers.
- 6). Press one of the 24 memory buttons on the right side of the base to begin programming. Once you have hit the button, press the number buttons in the center of the base to dial an internal office extension number you wish to save. Dial the number just as you would to reach it normally. When finished, press the "OK" button to save your number.
- 7). Repeat Steps 5 through 6 to save other internal office numbers.