How to Install Anco Wiper Blades
- 1). Pull the windshield wiper blades away from the glass until they're standing on their own, perpendicular to the glass.
- 2). Rotate the wiper blade toward you and at a 90-degree angle to the wiper arm.
- 3). Depress the release tab (located where the wiper arm and wiper blade meet) with your thumb and simultaneously slide the wiper blade away from the arm. Discard the old wiper blade.
- 4). Insert the plastic clip (included with new wiper blades) into the new wiper blade assembly by sliding the notched part of the clip into the center of the wiper blade rail until it snaps into place.
- 5). Align the hole in the center of the wiper blade over the end of the wiper arm. Slide the wiper blade over the arm past the plastic clip by about two inches.
- 6). Align the end of the wiper arm with the plastic clip on the blade. Pull the blade back toward the wiper arm until the clip snaps into place.
- 7). Repeat these steps for the other wiper blades on your vehicle.