How to Wire a Gold Medal Cotton Candy Machine
- 1). Turn the two knobs on each side of the cabinet top. Push the knobs down to lower the shipping bracket and allow the bell housing to float freely on the springs.
- 2). Place the cotton candy machine onto a cart or table. Ensure that there is at least six inches of ventilation area around each side vent.
- 3). Look inside the head assembly. Check that the floss ribbon (the heating component) has not come loose from the band. If it has, push it back in with your index finger.
- 4). Plug the machine into a wall socket. The machine is set for a 15 amp, 120 volt, 60 cycle standard wall receptacle.
- 5). Turn on the machine. Turn on the heater. Make your cotton candy.