Boat Throttle Shift Control Assembly Instructions
- 1). Place the cable mounting plate on its support. Set the driveshaft, driveshaft plate and detent spacer into place as a single unit. Set the shield in place. Insert the two shield bolts into the shield and thread the nuts into them. Tighten the nuts snugly with two adjustable wrenches. Screw the shield screws into place and tighten with a screwdriver.
- 2). Install the shield, shoe and neutral switch without dislodging the detent ball or its related components. Install the two bolts and lock nuts to the neutral safety shield. Place the two spacers on the driveshaft and plate.
- 3). Place the friction control cap and lock nut on the end of the throttle cam. Install the throttle cam on the assembly. Add the throttle arm spacer and install the screw and washer securing the throttle cam to the carburetor.
- 4). Thread the throttle arm screw and washer through the throttle arm. Install the throttle arm on the throttle cam.
- 5). Connect the throttle and shift cables to the completed throttle control assembly. Install the three Phillips screws that hold the remote assembly to the mounting plate. Place the remote control on the remote control mounting plate that is secured to the boat.