How to Change the Fuel Pump Relay on a 1994 BMW 325LS
- 1). Open the hood and locate the fuel pump relay for your specific engine.
- 2). Lift the cover off the relay box or electronics box, if the relay is not mounted directly to the fenderwell or the firewall. Locate the relay in the box, using the diagram on the inside of the cover.
- 3). Pull the relay out of its socket. If there is room between the relays, you should be able to pull it out with your fingers. If not, use the pliers to remove the relay. Take note of which direction the relay came out, so that you can put the new relay in correctly.
- 4). Line the tabs on the new relay up with the socket. Press the relay into the socket, ensuring that it snaps into place.