Bergen 6 Tent Instructions
- 1). Remove the tent, poles, ground sheet and guy lines from the stuff sack. Locate a flat camping area and remove all rocks and sharp objects from the tent site.
- 2). Spread the tent out on the ground. Insert two tent poles through the sleeves on one of the rooms. Hook the ends of each pole in the corresponding grommet. Attach the clips located on the tent body to the poles.
- 3). Insert two tent poles through the sleeves on the remaining room. Hook the ends of the poles in the corresponding grommets. Attach the clips located on the tent body to the poles.
- 4). Pound the stakes through the ground loops on the corners of one room and into the ground. Walk to the other room and pull it away from the staked room until it is tight. Pound stakes through the remaining ground loops and into the ground.
- 5). Attach the guy lines to the loops located on the tent body. Pull the guy lines tight to the ground and pound stakes through the guy line loops to finish forming each room.
- 6). Pull the shade awning out from the common area. Attach the two remaining poles to the grommets in each corner of the awning. Place the other end of each pole in the ground. Attach the guy lines to the awning corners and pull tight to the ground. Use a hammer and stakes to secure the guy lines to the ground.
- 7). Place the ground sheet in the common area. Use a hammer to pound stakes into each corner of the ground sheet.