Plastic Model Kit Building - The Basic Modeling Tools and Materials
Plastic model kits building are not as complicated as you think it is.
You just have to learn the necessary skill and apply it.
The learning process takes time and you might even feel frustrated and disappointed along the way.
The most essential element for your ultimate success is patience.
Take your time to acquire the basic skill and build up your confidence level and gradually proceed to more complicated model.
As with other hobby and craft, you will need some basic modeling tools and materials to build your first plastic model.
Here is a list of tools and materials that you can start with.
1.
Hobby knife For cutting purposes such as removing parts and trimming away access stub after cutting.
2.
Sandpaper For sanding off unwanted molded lines or sharp edges to achieve a smooth surface.
The sandpaper is available in extra fine, fine and medium grits.
Another alternative is to use emery boards.
3.
Liquid plastic cement This liquid plastic cement dissolves plastic surfaces to form a weld like bonding.
This type of solvent cement is much neater and easier to work with as compare to those that come in a tube.
4.
Plastic filler putty This is used to fill up any gaps to achieve a smooth surface and more realistic appearance.
5.
Small needle files For sanding precise or certain areas that could not be done by using sandpaper.
Small needle files are available in the form of square, round and triangle.
6.
Spring clamps or rubber bands To hold parts together during the bonding stage.
7.
Toolbox This is to keep all the small tools and materials in a handy and portable box.
8.
Table Find a table which you can use exclusively for your model building activity.
9.
Cutting board To be used as a form of protection for your table top against cement or extensive cutting by the knife.
10.
Desk lamp If the lighting in your work place is insufficient or too dim, use a desk lamp.
Avoid building your models in a bad lighting that will hurt your eyes and ended up with a bad job.
Some of the items listed above are optional; you can ignore or include it at a later stage.
As you begin to build more scale model kits and gain experience, the collection of tools and materials will also increase.
Plastic model kits building are an enjoyable and learning activity.
When you have transformed an assortment of plastic parts into a complete and finished model, it gives you a sense of pride and satisfaction.
You just have to learn the necessary skill and apply it.
The learning process takes time and you might even feel frustrated and disappointed along the way.
The most essential element for your ultimate success is patience.
Take your time to acquire the basic skill and build up your confidence level and gradually proceed to more complicated model.
As with other hobby and craft, you will need some basic modeling tools and materials to build your first plastic model.
Here is a list of tools and materials that you can start with.
1.
Hobby knife For cutting purposes such as removing parts and trimming away access stub after cutting.
2.
Sandpaper For sanding off unwanted molded lines or sharp edges to achieve a smooth surface.
The sandpaper is available in extra fine, fine and medium grits.
Another alternative is to use emery boards.
3.
Liquid plastic cement This liquid plastic cement dissolves plastic surfaces to form a weld like bonding.
This type of solvent cement is much neater and easier to work with as compare to those that come in a tube.
4.
Plastic filler putty This is used to fill up any gaps to achieve a smooth surface and more realistic appearance.
5.
Small needle files For sanding precise or certain areas that could not be done by using sandpaper.
Small needle files are available in the form of square, round and triangle.
6.
Spring clamps or rubber bands To hold parts together during the bonding stage.
7.
Toolbox This is to keep all the small tools and materials in a handy and portable box.
8.
Table Find a table which you can use exclusively for your model building activity.
9.
Cutting board To be used as a form of protection for your table top against cement or extensive cutting by the knife.
10.
Desk lamp If the lighting in your work place is insufficient or too dim, use a desk lamp.
Avoid building your models in a bad lighting that will hurt your eyes and ended up with a bad job.
Some of the items listed above are optional; you can ignore or include it at a later stage.
As you begin to build more scale model kits and gain experience, the collection of tools and materials will also increase.
Plastic model kits building are an enjoyable and learning activity.
When you have transformed an assortment of plastic parts into a complete and finished model, it gives you a sense of pride and satisfaction.