Pole barns are very useful for constructing structures that are supported by poles.
These structures are grounded in a solid way and the support is provided by the poles.
The best part about these structures is that there is no requirement of walls, floors or base.
Rather it is not obligatory to use floors or walls in a pole barn construction, but if one likes to have them, he or she can definitely do so.
A pole barn construction may include several aspects such as barn doors, sliding doors, Dutch doors, covered porches, skylights, etc.
The size of pole burn constructions vary and the framing is done horizontally to the poles to make sure that the structure remains solid.
The poles and frames of the construction are made up of woods and sometimes metals are also used.
For roofing, shingles or galvanized steel can be used.
Developing a pole burn is an excellent option as it is easy to construct and very economical also.
The materials required for these constructions are of low cost.
Some of the important materials used for these pole barns are pressure-treated lumber poles, steel or plywood for walls, concrete for attaching the poles, stringers, purlin, galvanized steel or shingles for roofing, screw and nails, doors, etc.
Apart from that, other valuable things that are needed for constructing pole barns are digging tools like hand digger, tractor powered auger; electric drill; hammer; hand saw; etc.
To build a pole burn, first you need to find the suitable location.
The location must be suitable as per the size of the construction.
Now, chalk out the post holes and make sure that the corners of the structure are square.
Dig the post holes and place the poles vertically.
Take a look whether everything is in level or not and only when you are completely convinced about the positioning, pour concrete into the hole and make the structure solid.
After that, at the top of the poles, place the stringers horizontally over the poles.
It is difficult to put the first truss and once it is done, the other truces can be set easily.
Now, purlins are to be placed crosswise the truss length.
To cover the section, you can install roof caps.
Remember that roofs made up of shingle or plywood takes long time to get completed and hence your measurements must be correct to avoid any unnecessary delay in the process of building pole burn.
In case you want to install walls, then you have to place girts in the entire construction in a completely leveled manner.
Make numerous rows and fix the grits to the posts with nails.
Then use plywood or metal sheets as you prefer and fix them on the wall, but do keep place for doors and windows.
Installation of Pole Barns is made of simple construction and requires the use of few tools.
This was an example of simple pole barn building, but overall the process is economical and takes short time.