How to Set the LPR on Etek Paintball Guns
- 1). Put on the protective eyeglasses as a safety measure. Take your Etek paintball gun out to a shooting range. Stand at the firing line across from a target.
- 2). Bring the gun up to a firing position. Loosen the LPR knob at the bottom front of the gun by rotating it counterclockwise. Continue rotating the knob until it comes out of the gun.
- 3). Reinsert the knob into the gun. Rotate it three turns clockwise.
- 4). Insert the tip of a Phillips jeweler’s screwdriver into the screw in the center of the knob. Rotate the screw a full turn clockwise.
- 5). Fire the gun. Note the strength of the impact at which the paintball capsule strikes the target. Rotate the screw one-quarter turn clockwise and fire again. Continue to do this until you are satisfied with the velocity of the gun.
- 6). Fire the gun another seven times at half-second intervals. Place the gun aside now that it has been adjusted. Remove the protective eyeglasses.