How to Use Power Lawn Edgers
- 1). Check the gas and oil of the edger to make sure that they are at optimal levels. Some lawn edgers have a fuel and oil mixture. Follow the edger manufacturer's recommended mixtures when filling it with fuel.
- 2). Check the lawn edger to make sure the equipment is in good operational condition. Ensure that the edging blade is not broken or loose; loose cables should also be repaired if found.
- 3). Place the edger along the side of what will be edged to make sure the depth is correct. There are several ways of adjusting the depth of an edging blade; use your discretion to set the desired depth.
- 4). Start the edger. You may need to choke the edger in order to start it. Pull the edger's cord, using a foot to press down on the edger to keep in place.
- 5). Place the edger along the surface to be edged, such as the driveway or a sidewalk. Walk behind the edger while pushing it in a forward motion. When finished with an edged line, tilt the edger back and push it to its next edging line. Slowly tilt the edger down so that the blade sinks into the next work area.