How to Assemble the Headlight on a 2000 Mitsubishi Eclipse
- 1). Engage the parking brake and make sure that the ignition of your Eclipse is turned off.
- 2). Open the hood and lift the retaining clip located at the rear of the headlight assembly. Pull the electrical wiring harness from the headlight bulb wire socket.
- 3). Remove the bulb by turning it counterclockwise until it frees from the socket. Insert the new bulb into the assembly by turning it clockwise into the socket until it is tightened.
- 4). Reconnect the electrical wiring harness to the bulb at the rear of the headlight assembly. Ensure the electrical wiring harness is secure by listening for the click as it is attached.
- 5). Close the hood and test the new headlight to ensure it is assembled and working properly.