How to Replace Rear Disc Brakes in a Kia Spectra
- 1). Raise the car from the ground using a car jack. Verify that the area is clear of children and animals. Distribute the Spectra's weight evenly.
- 2). Disassemble the wheels from the Spectra. Use a torque wrench to loosen the lug nuts. Take off the wheel and set is face up on the ground to prevent scratching.
- 3). Take off the parking brake cable located behind the rear disc brakes. Use your torque wrench to loosen the bolts. Remove the clip.
- 4). Loosen the caliper lock bolts. Remove the caliper and set is aside. Disconnect the V-springs from the brake pads, and then remove the pads and shims.
- 5). Rotate the piston with a special tool. This is available at the Kia dealership, item number OK9A4263001. Rotating the piston will compress it into the bore.
- 6). Replace the pads and shims with the new ones. Replace the V-springs and install the caliper. Use the torque wrench to tighten the lock bolts between 22 to 29 foot pounds.
- 7). Put the park brake cable back on and replace the clip. Install the wheels.