Measurements and Calculations

• 1). Estimate the gross living area. If available, use blueprints to obtain the approximate dimensions of all indoor rooms that are completely above ground.
  
  
• 2). Measure the external dimensions for buildings other than condos and cooperatives, i.e. the outside of the building, for each floor of the building. For condos and cooperatives, use the internal dimensions.
  
  
• 3). Divide floors into common shapes if there are odd shapes or cutouts. For example, if one of the floors has beveled corners, then divide that floor into rectangles and triangles.
  
  
• 4). Adjust your calculations if opposing walls are not parallel in order to account for the discrepancy. This can be accomplished by dividing the area into a rectangle and the appropriate number of triangles.
  
  
• 5). Calculate the area of each floor using the following area formulas.
  
  Rectangles: length x width
  
  circles: πr² (3.1416 can be used as an approximation for π)
  
  triangles: base x height/2
  
  Compare your values to the estimates obtained from the blueprints. If they are not close, then double-check your calculations.
  
  
• 6). Subtract the area of a room or stairwell from each floor other than the first if they span multiple stories. For example, if a 15-by-20-foot foyer is two stories tall, then those 300 square feet would count towards the gross living area on the first floor but not on the second floor. The total for the second story would thus have to be reduced by 300 square feet.
  
  
• 7). Add up all of the floor totals to arrive at the gross living area. Remember not to include the basement as a floor, even if the basement is finished, partially above ground and has windows.