How to Repair Croc Rivets
- 1). Remove the old, broken rivet from the croc and set it aside. Push the back part of the screw riveted washer through the hole and through the hole in the strap.
- 2). Place the washer over the back rivet as it comes up through the strap. This creates a sandwiching effect, holding the strap to the croc between the washer and the rivet back.
- 3). Screw the washer to the back rivet with a screwdriver. Make sure that you screw it snug and firm, but not so tightly that you can't move the strap on the croc.