Things You'll Need

Instructions

1

Wash your hair with a smoothing shampoo. Massage the shampoo into the root of the bangs with your fingertips and rinse thoroughly.
2

Gently squeeze the bangs dry with a paper towel to absorb excess water without causing frizz.
3

Blow dry the bangs using a round brush. Place the brush underneath the bangs, and slowly rotate it while directing the hair dryer at the root. Move the brush in the direction you want the bangs to sit.
4

Turn on the hair dryer’s cold air setting if available, and direct it at the root of the bang for 10 seconds to seal the cuticle.
5

Set the flat iron on the low setting and allow it to heat up. High heat can damage hair, making it dry and difficult to maintain in the future.
6

Place the flat iron at the root of the bangs, and slowly pull it downward until it has glided over the ends.
7

Allow the hair to cool, and run it through the flat iron one more time to seal in shine.
8

Apply hairspray to the bangs. Hold a can of maximum hold hairspray 10 inches away from the hair and cover the bangs in short bursts, focusing on the ends which are most likely to curl. Holding the can at a distance will prevent the spray from building up or creating a heavy look.