How Do I Replace the Battery in a Chopard Happy Diamond Watch?
- 1). Turn the watch over and place it face down on a soft cloth or towel.
- 2). Look at the back of the watch, called the case back. If it is smooth with a small indent on the side, the case back is called a snap-back case. If it has small slots, it is called a screw-back case.
- 3). Place the edge of the screwdriver into the indent on the side of the watch for a snap-back case. Wiggle the blade slightly and lift up, which will cause the case back to pop up and off.
- 4). Set the tips of a case-back wrench, which can be found at most watch repair stores, into the slots if the watch has a screw-back case. Turn the wrench in a counterclockwise motion. This will open the slots and allow the case back to be lifted off the watch.
- 5). Take out the old watch battery and place a new watch battery inside the watch. Use the old battery as a guide to buy a new one, if necessary. Watch batteries can be purchased at many hardware stores, jewelry stores, watch repair stores or any other stores that typically sell batteries.
- 6). Put the case back on the watch. Line up the indents on a snap-back case and press the case back until it pops into place. Place the tips of the case-back wrench back into the slots and turn the wrench in a clockwise motion to close.
- 7). Reset the watch.