How to Replace a Hoover Elite Supreme Vacuum Cleaner Belt
- 1). Unplug the vacuum's electrical cord.
- 2). Remove the height adjustment knob off the adjustment lever, setting it in a safe place, and press the handle release button to unlock the handle.
- 3). Turn the vacuum cleaner over, setting it on a flat surface, and unclip the latches on the bottom cover plate with a flat-head screwdriver.
- 4). Remove the cover plate from the bottom of the vacuum and take any remaining belt pieces, as well as debris, out of the vacuum.
- 5). Slide the brush roller out of the vacuum base, taking any pieces of string off the roller, and place the new belt around the brush roller.
- 6). Slide the roller with the belt attached back into the vacuum base and stretch the belt around the motor shaft in the middle of the base.
- 7). Reattach the cover plate to the bottom of the vacuum, pressing it until you hear the clips snap into place.
- 8). Turn the Hoover Elite Supreme vacuum back over and plug it back in.