How to Program the Keyless Entry on a 2006 Nissan
- 1). Open the driver's side door, get in and shut the door. All the doors must be closed to program the remotes.
- 2). Lock all the doors by pressing the driver's side lock/unlock button.
- 3). Insert and remove the key in the ignition six times within 10 seconds. The hazard lights will flash if you did it right.
- 4). Reinsert the key into the ignition and turn it to the "ACC" position. Be sure to not start the engine. Otherwise you will have to start over.
- 5). Press any button on your keyless remote within five seconds. The hazard lights will flash to indicate the remote has been programmed.
- 6). Unlock and lock the doors using the driver's side button and press any key on the next remote.
- 7). Repeat step 6 for any additional remotes you wish to program.