Choose a Hot Tub Cover
Why cover a hot tub? Most outdoor hot tubs are situated with no shelter or protection from the elements.
Being partly undercover (e.
g.
underneath a gazebo) will offer some protection but the UV from sunlight will eventually take its toll, fading the tub's surface.
There is also the risk of debris & leaves which can enter the hot tub and clog the system; plus of course an open hot tub poses a danger to children.
Heating is expensive without a cover, as you will find that you have no protection against heat loss and this will cost you more money over time.
If your current cover is worn, warped, sagging or has become heavy, it's time to replace it! Buyers Beware A good tub cover needs to be sturdy, well made and able to withstand everything the UK weather can throw at it! Strong construction and good insulation are essential.
However many hot tub covers available are of inferior quality.
Although initially they may be cheaper, you will find they quickly lose rigidity or let in water - and then you are faced with the extra cost of repairs.
All the covers supplied by Hydrospares are made in the UK using marine grade vinyl, steel reinforcements and superior core insulation.
Care and Consideration A cover is there to protect your hot tub and is not designed to be stood or walked on - improper use will shorten the life of any hot tub cover! A good cover will last on average between 3 & 5 years.
A good cover will be specially made to resist the effects of weather, UV, water and chemicals, as follows: -Vinyl, mesh, threads and zips are all Marine Grade (UV and mildew treated) -Virgin foam (not reclaimed or recycled) for a superior quality thick density core -Chemically resistant encapsulated wrap (not cheap plastic sheeting), twice sealed to protect the core -Zinc-plated steel reinforcement to prevent sagging (not aluminium, which bends far too easily) -Tapered cover (4" to 3") to allow water and snow to run off naturally - Child locks and reinforced handles - Made in the UK to your specifications - 10 colours to choose from -12-month guarantee Made to Measure Your cover should be made to measure to suit almost any shape of size of hot tub.
It's crucial that your cover fits well and it's worth spending some time getting the dimensions just right, as we cannot be responsible for covers that don't fit due to the wrong measurements!
Being partly undercover (e.
g.
underneath a gazebo) will offer some protection but the UV from sunlight will eventually take its toll, fading the tub's surface.
There is also the risk of debris & leaves which can enter the hot tub and clog the system; plus of course an open hot tub poses a danger to children.
Heating is expensive without a cover, as you will find that you have no protection against heat loss and this will cost you more money over time.
If your current cover is worn, warped, sagging or has become heavy, it's time to replace it! Buyers Beware A good tub cover needs to be sturdy, well made and able to withstand everything the UK weather can throw at it! Strong construction and good insulation are essential.
However many hot tub covers available are of inferior quality.
Although initially they may be cheaper, you will find they quickly lose rigidity or let in water - and then you are faced with the extra cost of repairs.
All the covers supplied by Hydrospares are made in the UK using marine grade vinyl, steel reinforcements and superior core insulation.
Care and Consideration A cover is there to protect your hot tub and is not designed to be stood or walked on - improper use will shorten the life of any hot tub cover! A good cover will last on average between 3 & 5 years.
A good cover will be specially made to resist the effects of weather, UV, water and chemicals, as follows: -Vinyl, mesh, threads and zips are all Marine Grade (UV and mildew treated) -Virgin foam (not reclaimed or recycled) for a superior quality thick density core -Chemically resistant encapsulated wrap (not cheap plastic sheeting), twice sealed to protect the core -Zinc-plated steel reinforcement to prevent sagging (not aluminium, which bends far too easily) -Tapered cover (4" to 3") to allow water and snow to run off naturally - Child locks and reinforced handles - Made in the UK to your specifications - 10 colours to choose from -12-month guarantee Made to Measure Your cover should be made to measure to suit almost any shape of size of hot tub.
It's crucial that your cover fits well and it's worth spending some time getting the dimensions just right, as we cannot be responsible for covers that don't fit due to the wrong measurements!