How to Engage the Blade on a Gravely Model L Mower
- 1). Place the forward/reverse and high/low speed operating levers on the right handle in the center or neutral position. Push the attachment clutch control located on the left handlebar completely forward.
- 2). Start the Gravely Model L by pushing the electric starter located at the lower rear of the mower until the tractor starts. Adjust the choke as the engine warms and begins to run smoothly.
- 3). Engage the blade of the Model L by pushing the outside, or forward/reverse, lever on the right handle slightly forward. At the same time pull the attachment clutch control, located on the inside of the right handle, to the rear. Listen for the tractor engine to pull down as the blade is engaged.
- 4). Push the throttle lever on the left handle forward to increase the engine idle speed. Adjust the throttle to a midpoint position as a rule of thumb.
- 5). Move the outside forward/reverse lever on the right handle forward to provide more power to the wheels and propel them in a forward motion.