iFocus.Life News News - Breaking News & Top Stories - Latest World, US & Local News,Get the latest news, exclusives, sport, celebrities, showbiz, politics, business and lifestyle from The iFocus.Life,

Ceiling Height Design Problems

104 6

    Change a Sharp A-Frame

    • You will face challenges with sharply sloped ceilings. This problem occurs when you build in the attic space of an A-frame house, for example. The ceiling height can be extremely tall in the center, making it difficult to install drywall or paint. Consider lowering a ceiling that poses this kind of problem. Build a flat ceiling that covers the steep part of the A-shape.

    Plan Tray Ceilings

    • Build tray ceilings over a one-story section of the house. These ceilings are possible if the typical 8-foot ceiling can be raised approximately 4 feet upward. Attic rafters must be changed to build a tray shape over a room, however. Ceiling rafters must be secured higher on attic framework, and old, lower rafters must be removed entirely.

    Accommodate Basement Issues

    • Basement rooms may have low ceilings. In order to run ductwork for heating and air, you might need to build a basement ceiling only 7 feet tall to hide the ducts. To eliminate this problem, consider running ductwork vertically through closet space, for example. Construct a framework to house the ducts, but keep the box confined to one side of each basement room. This will allow most of the ceiling space to reach 8 feet.

    Lift the Roof

    • Enclosing porches can cause ceiling problems. For example, a low roof on a porch you enclose will cut off the possibility of having an 8-foot ceiling. Raise part of the roof, cutting out a section to lift for holding windows. This area will be a wedge shape that opens the roof. Install windows across the raised section to provide lots of natural light. Install a skylight in this type of roof, too, at one end of the room. The light coming in from a skylight will expand the space visually.

    Work With a Dip

    • Multiple roof lines can cut off ceiling space. Constructing rooms in an attic area under a roof with various slopes can present a challenge. The ceiling can literally dip into the overhead space you need for ceiling height. To prevent this, create a room that ends where the dip occurs. Use this dipped-down ceiling area for bookcases or a media cabinet installation. This way, the ceiling dip adds architectural flair to the room.

Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
You might also like on "Home & Garden"

Leave A Reply

Your email address will not be published.