Ten Steps You Can Take Today to Repair Your Xbox 360
- Read on for a step by step tutorial on how to sort out most flashing red light problems on your Xbox 360.
- Firstly you will need a set of screwdrivers and some arctic silver - the last item you can get from any hardware store.
- Then you have to start opening up your console. Take a small screwdriver and take the faceplate off the outer case. Then you will be able to unscrew the screws holding the metal case which contains all the important stuff.
- Once this is open you will see the DVD drive and the cable which connects it to your Xbox and you should remove these.
- Now you are really into the guts of the system - you need to remove the motherboard and fan which you should now be able to see.
- Turn the Xbox over and use the screwdriver to flip off the Xclamps - this will let you see the chips that need to be dealt with.
- The graphical processing unit and the central processing unit will be visible under the heat sink and it is these components that need to be fixed.
- Wipe them clean and then put a small amount of arctic silver on each chip so that it can work as it should.
- Once the arctic silver has set you will almost be done, but you might want to put another washer on the motherboard when you put the system back together. This will stop the motherboard from bending in the heat which will mean your console lives longer.
- Screw everything tightly back together and you are good to go!
Is Your XBox 360 In Need Of Repair, But You Don't Know Where To Turn? This Tried And Trusted Review Site Will Provide You With The Best XBox 360 Repair Guides on How to repair a Xbox 360 Online Today So That You Can Make An Informed Choice
- Firstly you will need a set of screwdrivers and some arctic silver - the last item you can get from any hardware store.
- Then you have to start opening up your console. Take a small screwdriver and take the faceplate off the outer case. Then you will be able to unscrew the screws holding the metal case which contains all the important stuff.
- Once this is open you will see the DVD drive and the cable which connects it to your Xbox and you should remove these.
- Now you are really into the guts of the system - you need to remove the motherboard and fan which you should now be able to see.
- Turn the Xbox over and use the screwdriver to flip off the Xclamps - this will let you see the chips that need to be dealt with.
- The graphical processing unit and the central processing unit will be visible under the heat sink and it is these components that need to be fixed.
- Wipe them clean and then put a small amount of arctic silver on each chip so that it can work as it should.
- Once the arctic silver has set you will almost be done, but you might want to put another washer on the motherboard when you put the system back together. This will stop the motherboard from bending in the heat which will mean your console lives longer.
- Screw everything tightly back together and you are good to go!
Is Your XBox 360 In Need Of Repair, But You Don't Know Where To Turn? This Tried And Trusted Review Site Will Provide You With The Best XBox 360 Repair Guides on How to repair a Xbox 360 Online Today So That You Can Make An Informed Choice