How to Install a Power Generator
- 1). Select the site for your generator. Make sure that the location is easy to access for refueling and repair, but still protected from hazards. Include your fuel source in your site selection process for both ease of access and protection. (See Reference 1.)
- 2). Hire an electrician to install a transfer switch to the essential circuits in your home. A licensed electrician must perform this work. A transfer switch signals the generator that power is out and routes power to the circuits connected. (See Reference 2.)
- 3). Level your installation location. Set the generator in the level location to mark the places for mounting bolts. If you are installing on a concrete, metal, or wooden location, drill holes for the mounting bolts and bolt the generator in place.
- 4). Connect the generator to a fuel source. If you require a fuel tank, install it in the same manner as the generator (level and bolted down). If you connect your generator to natural gas, ensure that the fuel connection is secure and protected from damage. (See Reference 2.)
- 5). Connect the generator to the transfer switch. This will signal the generator to come on when the power goes out and provide power to the essential systems in your home. Consult your local electrical codes and ensure you are in compliance with all standards. (See Reference 1.)