How to Install Bath Mirrors
- 1). Measure and mark the wall where the top of the mirror will hang.
- 2). Place a level flat against the wall at the mark.
- 3). Trace along the level to create a straight line on the wall. This will be your guide to install the mirror so it is level.
- 4). Place a yard stick on the line and trace the yard stick so that the line is longer than the width of the mirror.
- 5). Mark a spot on the line where the center of the mirror will be located.
- 6). Mark a spot on the line where the left and right sides of the mirror will be located.
- 7). Measure the distance from the top of the mirror to the pre-installed clips located on the back.
- 8). Mark a spot on the wall where the clips will be located after installation of the mirror.
- 9). Measure the distance from the top clips on the mirror to the bottom clips. Mark this location on the wall.
- 10
Hold the mirror against the wall at the marks made. - 11
Affix the screws provided with the mirror through the clips to attach the mirror to the wall.