How to Put on Tint
- 1). Clean the window with a glass cleaner and rag. Spray the window glass with a wetting solution recommended by the manufacturer.
- 2). Apply the film to the window glass, overlapping the film onto the window's sash on all sides of the window.
- 3). Spray the wetting solution onto the film. Pull a squeegee once across the top of the window glass. Squeegee from the end of the squeegee pass down vertically to the bottom of the window in three or more separate motions until the film is free of bubbles.
- 4). Cut the excess film that is overlapping the window's sash with a utility knife or razor with a very sharp blade and a straightedge.
- 5). Spray the wetting solution and squeegee the window film in single passes.