Portable Garage Canopy Instructions
- 1). Lay out all the hardware and tubing on the ground where you want to set up the portable garage canopy. Separate the tubing for the top frame from the canopy leg tubing.
- 2). Slide the pieces of the top frame together, with the anchor washer of the connecting fittings toward the inside of the frame. The straight side of the connector piece is parallel to the ground, and the curved section connects down to the canopy leg and up to the peak of the roof.
- 3). Lay the canopy over the frame. Attach the bungee straps from the canopy to the frame.
- 4). Raise one side of the top frame and insert the canopy legs into each connecting fitting. Repeat with the other side.
- 5). Stake the canopy to the ground at each canopy leg.