How to Fill a Shark Steamer
- 1). Unplug the steamer’s power cord from the electrical outlet.
- 2). Hold down the tiger button until all the air pressure is released. Wait a minute before slowly turning the safety cap half a turn until the hissing and steam stops. Skip this step if the Shark Steamer has never been in operation.
- 3). Turn the safety cap counterclockwise until you can remove the safety cap completely off the canister.
- 4). Insert the end of the funnel included with the steamer into the filter hole. Pour water carefully in the funnel into the Shark's steam canister. Leave 1 inch between the water level and the top of the canister.
- 5). Place the safety cap back on the canister and tighten by turning clockwise.