How to Make Your Coffee Maker Last Longer
These days it is not uncommon to find people owning a coffee maker.
Buying a coffee maker is easy and very affordable too.
However, the difficult part comes when you talk about how to make it last longer.
Keeping a coffee maker in good working conditions is not just about replacing old filters with new ones regularly; it is also about ensuring that the whole device is thoroughly cleaned.
Maintaining it in tip-top condition can be an easy matter if you know how and the following tips will teach you how to clean the very commonly used 'drip coffee maker'.
1.
Cut off electrical connection Before you start cleaning the equipment, it is vital that you unplug it from the socket first.
This may seem to be a very obvious step but many people tend to take things for granted and forget about the plug.
2.
Separate the various parts for washing Next, remove the individual parts and clean them one by one.
For example, soak the glass pot in warm water and soap before washing.
Then, rinse and leave to hang upside down till it is dry.
3.
Unscrew attached parts Some parts cannot be separated easily and you will need to unscrew them.
However, you do not have to do this every time.
Just unscrew to wash properly if you found that some coffee has spilled over to these hidden parts.
4.
Cleaning stubborn stains It is a misconception that you only wash the coffee maker with some water and a dry cloth because some of the stubborn stains and deposits might be hard to remove.
If that is so, you may try washing them out with vinegar.
If washing with vinegar still does not work, you can fill the pot or other affected parts with vinegar and then turn on the machine to let it run.
Allow vinegar to drip in the maker.
Let it cool for a few minutes in order that the liquid contents have a chance to be drained.
If the stains are still there, repeat the process, otherwise you can remove the vinegar.
5.
Removing the vinegar smell Now that the stubborn stains are gone is your cleaning job done? No! You will now have to remove the smell of the vinegar as well so you should repeat the above process but this time, with water.
In order to thoroughly clean and remove the vinegar smell, you should repeat it at least twice.
6.
Re-attaching the parts Once everything is cleaned and dried, it is time to fix the parts back together again.
Screw back the sections you have taken apart earlier and once the device is fitted together again, keep it in a clean and safe place if you are not using it daily.
The above process might seem very tedious and daunting to some people but in order to make your coffee maker last longer, it is well worth the time and effort.
However, the good news is that you do not have to do it everyday.
Just ensure that it is carried out at least once a month and you will continue to have your freshly brewed cup of coffee every morning without fail!
Buying a coffee maker is easy and very affordable too.
However, the difficult part comes when you talk about how to make it last longer.
Keeping a coffee maker in good working conditions is not just about replacing old filters with new ones regularly; it is also about ensuring that the whole device is thoroughly cleaned.
Maintaining it in tip-top condition can be an easy matter if you know how and the following tips will teach you how to clean the very commonly used 'drip coffee maker'.
1.
Cut off electrical connection Before you start cleaning the equipment, it is vital that you unplug it from the socket first.
This may seem to be a very obvious step but many people tend to take things for granted and forget about the plug.
2.
Separate the various parts for washing Next, remove the individual parts and clean them one by one.
For example, soak the glass pot in warm water and soap before washing.
Then, rinse and leave to hang upside down till it is dry.
3.
Unscrew attached parts Some parts cannot be separated easily and you will need to unscrew them.
However, you do not have to do this every time.
Just unscrew to wash properly if you found that some coffee has spilled over to these hidden parts.
4.
Cleaning stubborn stains It is a misconception that you only wash the coffee maker with some water and a dry cloth because some of the stubborn stains and deposits might be hard to remove.
If that is so, you may try washing them out with vinegar.
If washing with vinegar still does not work, you can fill the pot or other affected parts with vinegar and then turn on the machine to let it run.
Allow vinegar to drip in the maker.
Let it cool for a few minutes in order that the liquid contents have a chance to be drained.
If the stains are still there, repeat the process, otherwise you can remove the vinegar.
5.
Removing the vinegar smell Now that the stubborn stains are gone is your cleaning job done? No! You will now have to remove the smell of the vinegar as well so you should repeat the above process but this time, with water.
In order to thoroughly clean and remove the vinegar smell, you should repeat it at least twice.
6.
Re-attaching the parts Once everything is cleaned and dried, it is time to fix the parts back together again.
Screw back the sections you have taken apart earlier and once the device is fitted together again, keep it in a clean and safe place if you are not using it daily.
The above process might seem very tedious and daunting to some people but in order to make your coffee maker last longer, it is well worth the time and effort.
However, the good news is that you do not have to do it everyday.
Just ensure that it is carried out at least once a month and you will continue to have your freshly brewed cup of coffee every morning without fail!